Short URL:
Photo Sharing & Video Hosting by SmugMug
  Photo Sharing  Login  Help  
 
 
AlexAndChristine  > Bicycles > Fixtures > Arctos Clone Frame Fixture
gallery pages:  <  1  2  3  4  >  
< 10 of 35 >
Make this block steady on the reference surface.
This is my simple method of keeping the miters in phase. There is a dummy BB sitting on the far end of the alignment table.
Setting the miter angle.
Ready to miter. I only have one 1.25" block, it would be good to get a second one.
Miter complete.
Miter as it came off of the mill. Not too bad.
The STA tower assembly pivots around the BB shell (so adjusting the STA angle does not move the BB shell). The 3 outer handles move this assembly left and right, the one in the slot is for adjusting the seat tube angle. There is a scale for reading off the seat tube angle on the other side.
The bottom bracket post uses locking collars and a fly cut aluminum block along with 5/8" solid rod. The adjustable locking collar makes it easy to adjust for 73mm or 68mm bottom bracket shells.
Head tube tower. The locking handle sets vertical offset (Y), the blue bolt is used to set HTA.
Make this block steady on the reference surface.
Make this block steady on the reference surface.
Make this block steady on the reference surface.
Panasonic DMC-GF2 |
More details: exif |
Original size: 4000x2672 |
Current: 800x535 |
Share photo: links, forums, blogs |
gallery pages:  <  1  2  3  4  >  
< 10 of 35 >
Photo Sharing by SmugMug · Login · Contact · Help · Portions © 2013 SmugMug, Inc.
Show FeedsAvailable Feeds
Gallery Photos:
Atom FeedAtom | RSS FeedRSS