NAHBS 2007 - Page 8 - AlexAndChristine's Photos- powered by SmugMug

Gallery pages: << < 5 6 7 8 9 10 > >>

< 64 of 265 >

AlexAndChristine > Kirk custom front rack. This is built for a specific camera bag (the customer was a photographer). The bag has a strap which tightens around the narrow part of the backstop. The bag also attaches with a M5 nut through a drainhole in the bag. The bike has normal road geometry. Kirk thought that the bag weighed 6-7lbs when full.

AlexAndChristine > Kirk custom front rack. This is built for a specific camera bag (the customer was a photographer). The bag has a strap which tightens around the narrow part of the backstop. The bag also attaches with a M5 nut through a drainhole in the bag. The bike has normal road geometry. Kirk thought that the bag weighed 6-7lbs when full.

AlexAndChristine > Integrated rear pannier rack on a mixte frame. There is no lateral triangulation but the rack uses 10mm tubular steel and is pretty stout.

AlexAndChristine > The upper tubes on the mixte curve into the bottom of the rear rack and ultimately hold the taillights. It's a pretty design.

AlexAndChristine > The front handlebar bag rack is brazed onto the fork.

AlexAndChristine > Dave Bohm's personal tandem. The details and workmanship that went into this bike are amazing.

AlexAndChristine > The eccentric bottom bracket on the tandem. It is mounted on sliders under the bottom tube.

AlexAndChristine > The rear bottom bracket also hangs below the bottom tube.

AlexAndChristine > Custom large chainring.

Kirk custom front rack. This is built for a specific camera bag (the customer was a photographer). The bag has a strap which tightens around the narrow part of the backstop. The bag also attaches with a M5 nut through a drainhole in the bag. The bike has normal road geometry. Kirk thought that the bag weighed 6-7lbs when full.

> Kirk custom front rack. This is built for a specific camera bag (the customer was a photographer). The bag has a strap which tightens around the narrow part of the backstop. The bag also attaches with a M5 nut through a drainhole in the bag. The bike has normal road geometry. Kirk thought that the bag weighed 6-7lbs when full.

Kirk custom front rack. This is built for a specific camera bag (the customer was a photographer). The bag has a strap which tightens around the narrow part of the backstop. The bag also attaches with a M5 nut through a drainhole in the bag. The bike has normal road geometry. Kirk thought that the bag weighed 6-7lbs when full.

Camera: Pentax Corporation (Pentax K10d) |

More details: exif |

Original size: 1071px x 1600px |

Current: 201px x 300px |

Other sizes: Small • M • L • O • save photo |

Share photo: links, forums, blogs |

Keywords: bicycle kirk handlebar bag rack nahbs trackfixed gear custom rack

Gallery pages: << < 5 6 7 8 9 10 > >>

< 64 of 265 >

Comments

|

New comment: Requires approval

Name: Email: Link:

Connect with Facebook

Comment on: | Rating: stars

To foil spammers, enter this code:

in this box: Code unreadable?

Available Feeds | What are feeds?

Gallery Photos:

Atom |

RSS